Parabit Solo Hot Melt System - Plaza / Podium Decks / Terraces / Balconies Roofs

Many modern buildings incorporate:

  • Landscaped or paved areas over basement or subterranean areas such as car parks.
  • Terraces tend to be areas within the footprint of the building providing access for public traffic.
  • Balconies - A balcony is typically on the outside of a building accessed from a window or door enclosed by a suitable handrail.

Being flat roofs they still require a durable waterproofing system to be installed.

Parabit Solo Hot Melt System - Plaza / Podium Decks / Terraces / Balconies Roofs

1 Paving, bedded on sub‑base   6 Icopal Bitumen Primer
         
2 Drainage Board   7 PARABIT Hot Melt Compound
         
3

Icopal SLP 300 Fleece

  8 Power Elastomeric 250 Sand
         
4 Power Elastomeric 250 Sand
  9 Thermaweld Mineral Capsheet
         
5 Parabit Solo Membrane   10 Decorative board, to upstand

 

Waterproofing System

Install the Parabit Solo Hot Melt Waterproofing System in accordance with the methods outlined in the Parabit Solo hot melt installation manual.

Note: Prior to application of any ballast or thermal insulation, it is recommended that the finished hot melt roofing membrane be electronically integrity tested to ensure the roof has been thoroughly inspected, checked and passed off as being watertight.

Drainage Layer (depending upon specification)

Where rapid removal of rainwater is desired or where installing above a flat roof deck with zero falls, install an appropriate drainage board over the completed Parabit Duo membrane immediately after the leak detection test on horizontal surfaces. If testing is delayed, install a temporary covering to protect the Parabit Solo membrane from damage by other trades.

Paving

Following completion of the waterproofing and installation of the drainage layer, the surface shall receive pavings in accordance with BS 7263: Pt.1 laid on an appropriate bed by others, as per project requirements.

    Contact Icopal 0161 8654444

    Find Local Support

    To discuss your project in more detail please contact
    Your Local Area Manager

     

    Technical Support

    Telephone:

    0330 123 4585

    Email: technical.uk@bmigroup.com

     

    Sales Enquiries & Orders

    Telephone:

    0843 224 7400

    Fax:

    0843 224 7401

    Email: sales.admin@bmigroup.com

    This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

    Icopal: We Protect Your Building