Primers and Ancillaries for Icopal Elastoflex Liquid Roofing System

Elastoflex Reinforcing Mat

Elastoflex Reinforcing Mat is a polyester based reinforcing fleece. The fleece is embedded into the Elastoflex liquid applied waterproofing coating in a ‘wet-on-wet’ application.

The fleece which is white in colour is available in a number of widths in 120 gsm, 165 gsm and 200 gsm weight grades.

  • Elastoflex Reinforcing Mat 10 – 120 gsm fleece for use with systems requiring a 10 year guarantee.
  • Elastoflex Reinforcing Mat 15 – 165 gsm fleece for use with systems requiring a 15 year guarantee.
  • Elastoflex Reinforcing Mat 20 – 200 gsm fleece for use with systems requiring a 20 year guarantee.

Product Range

Product Code Description Roll Size
3006222 Elastoflex Reinforcing Mat 10 1.05m x 50m
3006223 Elastoflex Reinforcing Mat 10 0.70m x 50m
3006224 Elastoflex Reinforcing Mat 10 0.262m x 50m
3006225 Elastoflex Reinforcing Mat 15 1.05m x 50m
3006226 Elastoflex Reinforcing Mat 15 0.70m x 50m
3006227 Elastoflex Reinforcing Mat 15 0.262m x 50m
3006228 Elastoflex Reinforcing Mat 20 1.05m x 50m
3006229 Elastoflex Reinforcing Mat 20  0.70m x 50m
3006230 Elastoflex Reinforcing Mat 20 0.262m x 50m

 

Application Conditions

Apply only when atmospheric and substrate temperatures are greater than 5 °C. The surface of the substrate should be clean and dry and must be 3 °C above the dew point. If the surface is below or at dew point temperature then moisture can form at the surface and affect coating adhesion and curing.

Application Method

Following application of the required quantity of Elastoflex waterproof coating (2/3rd of system coverage rate), immediately apply the Elastoflex Reinforcing Mat into the coating, and roll the surface with a perlon roller, eliminating potential air bubbles and encouraging saturation of the fleece. The fleece helps regulate layer thickness, as correct application occurs when the fleece is fully saturated, indicated by the colour change.

Overlap adjacant sheets of the fleece by a minimum 50 mm. Ensure the overlaps areas (above and below) are fully saturated to maintain continuity of the waterproofing system.

Once saturated, immediately apply the remaining 1/3rd of Elastoflex waterproof coating as the top layer, and lightly roll to remove excess material.

See Elastoflex Coating product information sheet for coverage rates and installation guidance.

    Contact Icopal 0161 8654444

    Find Local Support

    To discuss your project in more detail please contact
    Your Local Area Manager

     

    Technical Support

    Telephone:

    0330 123 4585

    Email: technical.uk@bmigroup.com

     

    Sales Enquiries & Orders

    Telephone:

    0843 224 7400

    Fax:

    0843 224 7401

    Email: sales.admin@bmigroup.com

    This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

    Icopal: We Protect Your Building