Elastoflex TPO Primer is intended to prepare the surface of existing flexible polyolefin (TPO/FPO) thermoplastic membranes and enhance the adhesion of the new Elastoflex LWS liquid-applied waterproofing systems. For application to other plastic sheets (such as EDPM, PIBs etc) consult Icopal Technical Services.
Product Range
| Product Code |
Description |
Size |
| 3006215 |
Elastoflex TPO Primer |
3kg |
Properties
| Performance Data: |
| Container size: |
4kg |
| Form: |
Liquid |
| Colour: |
Clear/Transparent |
| Application rate: |
Approx 100 g/m² |
| Coverage per pack: |
Approx 40 m² |
| Workability period: |
5 minutes 1 |
| Rainproof after: |
Approx 30 minutes 1 |
| Can be walked on after: |
Approx 30 minutes 1 |
| Shelf life: |
6 months |
1. Dependant on environmental conditions. Values attained at 23 °C and 50% rel humidity. Times given are reduced with higher (and increased with lower) surrounding and work surface temperatures.
Application Conditions
Apply only when atmospheric and substrate temperatures are greater than 5 °C. The surface of the substrate should be clean and dry and must be 3 °C above the dew point. If the surface is below or at dew point temperature then moisture can form at the surface and affect coating adhesion and curing.
Application Method
Prime in one operation and distribute the primer with a perlon roller to avoid accumulation of material.
Once Elastoflex TPO Primer is dry and tack-free, the Elastoflex LWS waterproofing system can be applied after 15-30 minutes depending on atmospheric conditions. Ensure the Elastoflex LWS waterproofing system is applied within 24 hours, otherwise separation effects can occur.
Personal Protective Equipment (PPE) should be worn.