Elastoflex Bulking Sand comprises fine silica sand granules supplied in a 6.25 kg bag, and is intended to be combined with the
Elastoflex Walkway Compound to form a slurry and used where there is a need to create a level walkway surface.
||Elastoflex Bulking Sand
|Coverage per Container:
Apply only when atmospheric and substrate temperatures are greater than 5 °C. The surface of the substrate should be clean and dry and must be 3 °C above the dew point. If the surface is below or at dew point temperature then moisture can form at the surface and affect coating adhesion and curing.
Should a completely level surface be required, prior to application of the Elastoflex Anti-Skid Walkway System apply Elastoflex Walkway Compound mixed with Elastoflex Bulking Sand at the specified coverage rates using a 6 mm serrated metal squeegee.
Mix components A & B of the Elastoflex Walkway Compound and add the full 6.25kg bag of the Elastoflex Bulking Sand (component C).
Using a high torque paddle mixer set at low speed, mix the solution to create a homogenous slurry. Apply the mixed slurry to the substrate at a coverage rate of approximately 3.5 kg/m². A spiked roller can be used to de-aerate the applied coating. Once cuontent Editor.aspx?ic=People*y system can be applied. Working time for the mixed solution is approximately 15 minutes at 23 °C.
Personal Protective Equipment (PPE) should be worn.