Sealoflex Prima UV Clear forms part of the Sealoflex Prima Walkway System and is used as a final encapsulation and UV protection layer above the embedded Sealoflex Quartz.
Designed to provide the optimum combination of aesthetic and functional performance, Sealoflex Prima anti-skid surfacing products form an integral part of a complete system where waterproofing and surfacing are required.
||Sealoflex Prima UV Clear
||Approx 250 g/m²
|Coverage per Container:
||25 minutes 1
||Approx 3 hours 1
|Can be walked on after:
||Approx 12 hours 1
1. Dependant on environmental conditions. Values attained at 23 °C and 50% rel humidity. Times given are reduced with higher (and increased with lower) surrounding and work surface temperatures.
Apply only when atmospheric and substrate temperatures are greater than 5 °C. The surface of the substrate should be clean and dry and must be 3 °C above the dew point. If the surface is below or at dew point temperature then moisture can form at the surface and affect coating adhesion and curing.
Apply the Sealoflex Prima UV Clear with a perlon fleece roller and always make a final pass using a dry roller to help create an even finish.
For ease of application, transfer the Sealoflex Prima UV Clear to a large decorator’s roller tray. Avoid pouring the Sealoflex Prima UV Clear directly from the tin onto the walkway surface.
Walk-on time for the Sealoflex Prima UV Clear is approximately 12 hours depending on coverage rate used and ambient conditions. Allow to fully cure before trafficking.
Personal Protective Equipment (PPE) should be worn.