Enviroflex™ Standard Quartz is used to create a hard wearing antiskid surface, or alkaline protection layer above the primary waterproof coating
Enviroflex™ Standard Quartz comprises a black and light grey granule mix of kiln dried silica granules of diameter 0.4 to 0.8 mm. Enviroflex™ Standard Quartz is supplied in a 25 kg bag.
||Enviroflex™ Standard Quartz (grey)
Product Data and Performance
||Approx 2.5 to 4 kg per m²
Allow the Enviroflex™ waterproofing system to fully cure before beginning application of the anti-skid walkway system.
Once cured, apply a further coat of the Enviroflex™ Liquid Waterproof Coating at a rate of 0.2 litres per m². This provides a base resin layer to receive the Enviroflex™ Standard Quartz.
Broadcast the Enviroflex™ Standard Quartz by hand into the resin layer while it is still wet. Ample quantities of the quartz sand should be applied into the receiving resin to ensure full embedment of the granules. Once the granules and receiving resin have sufficiently cured, the excess granules can be swept off, collected and re-used prior to sealing with the Enviroflex™ Wearcoat Clear.
Personal Protective Equipment should be worn.