Icopal Thermazone Roof Insulation Boards for Flat Roofs

Thermazone Elastoboard F

Thermazone Elastoboard F is intended for use as part of the Elastoflex LWS liquid-applied waterproofing warm roof system.

Thermazone Elastoboard F is suitable for use over all types of structural deck and must always be laid over a suitable vapour control layer. It may be used without additional reinforcement when the intended roof access is occasional foot traffic and moderate point loading. For balconies and terraces, and for more heavily trafficked areas Thermazone Elastoboard H insulation should be specified instead.

For detailed waterproofing specifications please contact Icopal’s Technical Department.  

Insulation Board Core & Facings

Insulation Board Facings: Thermazone Elastoboard F is faced with a 3mm highly dense reinforced bitumen to the upper surface and with a multi-layered complex of kraft paper and metal foil to the underside which are autohesively bonded to the insulation core during manufacture.. 

The Core : Thermazone Elastoboard F is manufactured from a high performance CFC/HCFC–free polyisocyanurate (PIR) based formulation with a typical density of 30 kg/m3. The board is manufactured with a tongue and groove (T&G) interlocking edge which reduces cold bridging and heat losses through the seams, making it very thermally efficient.

Thermazone Elastoboard F is manufactured without the use of CFCs/HCFCs and has zero Ozone Depletion Potential (ODP) and a low Global Warming Potential (GWP)..

Board Sizes

Flat Board

Board Size (mm)1 1200
Thickness (mm) 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150

1. Manufactured with tolerance ±2 %.

Tapered Roofing

Thermazone Elastoboard F is available in a tapered version at 1:60 and 1:80 fall. Boards are manufactured at a minimum depth of 20mm at 1:60 and at 30mm for 1:80. Tapered boards are supplied at all depths as a single piece board, and are flat edged for butt jointing on site.

Falls other than the standard 1:60 and 1:80 can also be provided to suit project requirements. Please contact Icopal Limited’s Technical Department for further information. 

Tapered Board (1:60)

Length (mm) 1200
Width (mm) 1200
Min Thickness (mm) 20

Tapered Board (1:80)

Length (mm) 1200
Width (mm) 600
Min Thickness (mm) 30

Contact Icopal 0161 8654444

Find Local Support

To discuss your project in more detail please contact
Your Local Area Manager

 

Technical Support

Telephone:

0330 123 4585

Email: technical.uk@bmigroup.com

 

Sales Enquiries & Orders

Telephone:

0843 224 7400

Fax:

0843 224 7401

Email: sales.admin@bmigroup.com

Latest News

BMI crowns the highest building in the West Country

Read more...

Winners and contenders alike praise the BMI Apprentice of the Year competition

Read more...

BMI National Training Centre flattens Ceiran’s learning curve

Read more...

Complexity simplified with BMI Icopal’s Total Torch system curve

Read more...

BMI’s apprentice competition demonstrates its commitment to roofing’s future

Read more...

BMI UK & Ireland launches to the UK construction industry

Read more...

This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

Icopal: We Protect Your Building