Thermazone Roofboard Fillets are manufactured from a high performance CFC/HCFC--free polyisocyanurate (PIR) insulation and are cut into a triangular cross section of 50 mm x 50 mm, and supplied in 1.2 metre lengths. The upper surface is finished with a mineralised glass tissue.
|
 |
Intended Use
Thermazone Roofboard Fillets are intended to be used to create a smooth transition at changes in direction within waterproofing details. It is suitable for use with thermically activated self-adhesive bitumen roof membranes, as well as traditional ‘pour and roll’ bitumen bonded roofing applications. It is also suitable for use with Icopal single-ply adhered or mechanically fastened single ply systems. It used to support membrane flashings and corner reinforcement strips to break the sharp angle between horizontal and vertical surfaces.
Product Availability
Product Code |
Description |
Pack Size |
3101703 |
Thermazone Roofboard Fillets |
96 |
Product Data and Performance
Product Data |
Length: |
1.2m |
Cross Section (triangular): |
50mm x 50mm |
Composition: |
Rigid polyisocyanurate (PIR) |
Quantity per Carton: |
96 No. lengths |
Surface Preparation
Surfaces to receive the fillet and waterproofing must be cleaned of any loose material and contaminates.
Application
Apply a bead of Icopal SFT Bitumen adhesive along the surface of the insulation board/substrate. Position the Thermazone Roofboard Fillet along the internal corner of the detail, bedding onto the adhesive and carefully press firmly into position to facilitate a secure bond to the substrate.