Designing the Right Single Ply Roofing System

CAD Library - Mechanically Fixed

The CAD drawings shown below illustrate typical detailing to United Kingdom practices, before using these drawing they should be checked to ensure that they meet your projects individual needs and comply with local regulations and building practices. 

Please click on any of the icons below to select the appropriate detailing for your project.  

Drawing No Key  PDF  DWG
MP-W-01-01-MF Warm roof upstand to abutment wall with cover flashing DWG drawing
MP-W-01-02-MF Warm roof upstand to abutment wall with termination bar
and cover flashing
DWG drawing
MP-W-01-03-MF  Warm roof upstand with termination behind cladding DWG drawing
MP-W-01-04-MF Warm roof upstand to abutment wall with coated metal cover
flashing
DWG drawing
MP-W-01-05-MF Warm roof upstand to abutment wall with cover flashing DWG drawing
MP-W-02-06-MF Warm roof adhered upstand with peel stop to parapet wall DWG drawing
MP-W-02-07-MF Warm roof adhered upstand to parapet wall – Tube washer &
fastener perimeter fixing
DWG drawing
MP-W-02-08-MF Warm roof upstand with peel stop to parapet wall DWG drawing
MP-W-02-09-MF Warm roof upstand to parapet wall – Tube washer &
fastener perimeter fixing
DWG drawing
MP-W-03-01-MF Warm roof to watercheck DWG drawing
MP-W-04-01-MF Warm roof to coated metal drip edge DWG drawing
MP-W-05-01-MF Warm roof to outlet DWG drawing
MP-W-05-02-MF Warm roof to outlet with sump DWG drawing
MP-W-05-03-MF Warm roof to parapet outlet DWG drawing
MP-W-07-02-MF Warm roof to cable duct DWG drawing
MP-W-07-04-MF Warm roof to hot service penetration DWG drawing
MP-W-07-05-MF Warm roof to service penetration DWG drawing
MP-W-07-06-MF Warm roof to constant force post DWG drawing
MP-W-09-01-MF Warm roof to standing seam profile DWG drawing
MP-W-09-03-MF Joints and welds: Side lap DWG drawing
MP-W-09-04-MF Joints and welds: Head lap DWG drawing
MP-W-09-06-MF Warm roof to walkway membrane DWG drawing
MP-W-09-07-MF Joints and welds: Additional mechanical fixing on upstands
higher than 0.5m
DWG drawing
MP-W-10-01-MF Warm roof pitched roof junction DWG drawing
MP-W-10-02-MF Warm roof to valley DWG drawing
MP-W-10-03-MF Warm roof to ridge DWG drawing
MP-W-10-04-MF Warm roof with drip to pitched roof junction (mansard) DWG drawing
MP-W-10-05-MF Warm roof to pitched roof junction (mansard) DWG drawing
MP-W-12-02-MF Joints and welds: Expansion detail DWG drawing
MP-W-13-01-MF Warm roof upstand to internal gutter DWG drawing
MP-W-13-02-MF Warm roof upstand to internal gutter formed in deck DWG drawing
MP-W-13-03-MF Warm roof to internal gutter DWG drawing
    Contact Icopal 0161 8654444

    Find Local Support

    To discuss your project in more detail please contact
    Your Local Area Manager

     

    Technical Support

    Telephone:

    0330 123 4585

    Email: technical.uk@bmigroup.com

     

    Sales Enquiries & Orders

    Telephone:

    0843 224 7400

    Fax:

    0843 224 7401

    Email: sales.admin@bmigroup.com

    Latest News

    BMI’s apprentice competition demonstrates its commitment to roofing’s future

    Read more...

    BMI UK & Ireland launches to the UK construction industry

    Read more...

    BMI hosts a meeting of minds

    Read more...

    BMI Building Futures For Veterans

    Read more...

    The Best From The West

    Read more...

    Hot melt provides great result for sports area

    Read more...

    This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

    Icopal: We Protect Your Building