Designing the Right Single Ply Roofing System

Roof Edge Details

Whenever possible, external roof finishes shall be constructed using Monarplan PVC coated metal. Separate lengths of the trim are butt jointed (leaving a 5mm gap for expansion) and strapped with Monarplan D.

Located beneath the vapour control layer (if applicable) and coated metal shall be Monobond LT tape to prevent the penetration of wind.

Monarplan PVC coated metal installation guide



Roof Edge Details - Monarplan Mechanically Fixed Single Ply Roofing System


1. Monarplan FM single ply membrane.
2. Insulation.
3. Vapour control layer.
4. Substrate.
5. Coated metal.

6. Hot air weld min. 40mm.
7. Sealing tape.
8. Timber batten.
9. Gutter



Video demonstrating installation of a mechanically fastened verge detail


    Contact Icopal 0161 8654444

    Find Local Support

    To discuss your project in more detail please contact
    Your Local Area Manager


    Technical Support


    0330 123 4585



    Sales Enquiries & Orders


    0843 224 7400


    0843 224 7401


    This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

    Icopal: We Protect Your Building