Monarplan Single Ply Roofing

Coated Metal Drip Angle Butt Joint

Coated metal drip angles provide an aesthetically pleasing watertight drip detail to a single ply roof. Installing adjacent sections of coated metal drip angles requires a 5mm gap to be left between adjoining panels. The video demonstrates how to waterproof the join between the butt jointed sections.  


Video Transcript

Mechanically fasten the pre-fabricated metal sections, leaving a 5mm gap between the adjoining panel.

Cut aluminium foil tape to the required length and adhere over the butt joint between the two coated metal sections.

Measure the coated metal angle and cut a section of Monarplan PVC single ply roofing membrane of the corresponding length.

Round off the corners and spot weld in position.

Using the 20mm nozzle, complete the pre-weld before continuing to weld all edges to the coated metal angle. 

    Contact Icopal 0161 8654444

    Find Local Support

    To discuss your project in more detail please contact
    Your Local Area Manager


    Technical Support


    0330 123 4585



    Sales Enquiries & Orders


    0843 224 7400


    0843 224 7401


    This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

    Icopal: We Protect Your Building