Monarplan Single Ply Roofing

Verges - Forming A Fully Adhered Verge In Single Ply Roofing Membranes

The video shows how to terminate Monarplan GF Fleeceback single ply membrane to a coated metal drip trim at a roof edge / verge incorporating Monarplan Reinforced Strip.

 

Video Transcript

Mechanically fix the prefabricated coated metal above the Monarplan GF Fleeceback single ply roofing membrane.

Strap the butt joint between the 2 sections of coated metal using Monarplan D, leaving a 5mm gap between lengths

Position Monarplan Reinforced Strip, ensuring an adequate lap on the coated metal and the underlying membrane. Unroll and cut to the appropriate length.

Pre-weld the Monarplan Reinforced Strip to the coated metal and Monarplan GF Membrane.

Fully weld the reinforced strip to the coated metal. At the butt joint detail, use a penny roller to crease the membrane into the cross joint ensuring a good weld.

Continue to weld, again using a penny roller at all cross joints. Complete the detail by welding the opposite edge to the underlying Monarplan single ply roofing  

 

 

 

    Contact Icopal 0161 8654444

    Find Local Support

    To discuss your project in more detail please contact
    Your Local Area Manager

     

    Technical Support

    Telephone:

    0330 123 4585

    Email: technical.uk@bmigroup.com

     

    Sales Enquiries & Orders

    Telephone:

    0843 224 7400

    Fax:

    0843 224 7401

    Email: sales.admin@bmigroup.com

    This site uses cookies in accordance with our Website Privacy Policy. By continuing to browse the site you are agreeing to our use of cookies. To browse without the use of cookies, you can opt-out as explained in our Website Privacy Policy or adjust your cookie settings for your browser

    Icopal: We Protect Your Building